Removing grease and stubborn stains from your driveway becomes quick and easy with professional pressure washing services in Mississauga.
However, if you plan to tackle the job yourself, follow these simple step-by-step instructions for safe and effective results.
Things You Will Need
- Broom
- Stiff brush
- Pressure washer
- Detergent
- Degreaser
- Safety gloves
- Waterproof sealer
Step-by-Step Guide
Step 1: Clean the Surface
Sweep the driveway thoroughly and remove all loose dirt, leaves, and debris.
Step 2: Protect Surrounding Areas
Cover nearby exterior walls, doors, and plants with plastic sheets and secure them using tape to prevent damage from detergent and high-pressure water.
Step 3: Read Safety Instructions
Review the safety manual provided with your pressure washer.
Follow any specific preparation steps and safety guidelines mentioned by the manufacturer.
Step 4: Apply Degreaser
Spray the degreaser on the driveway from at least 6 inches away to loosen oil and grease stains.
Use a stiff brush to scrub the surface thoroughly.
Step 5: Apply Detergent
Use the pressure washer to apply detergent over the driveway.
Ensure you are using the correct hose and attachments that are compatible with detergent use.
Step 6: Pressure Wash the Surface
Change the pressure washer tip and begin washing the driveway using high-pressure water.
Move in steady, overlapping strokes for even cleaning.
Step 7: Seal the Driveway
Apply a waterproof sealant once the surface is completely dry.
Allow the sealant to cure overnight for the best protection and long-lasting results.
Final Notes
That’s it — your driveway is now clean, protected, and refreshed.
This completes the pressure washing Mississauga process.