If you are planning for exterior cleaning, then it’s only natural to look for the fastest and most effective way to get stubborn stains removed.
That being said, pressure washing in Toronto is one of the quickest and most efficient methods to clean exterior surfaces.
Why Pressure Washing?
Pressure washing uses high-pressure water to remove dirt, grime, and buildup from hard surfaces. Because of the intense pressure, stains are removed quickly and without physical effort.
Even better — pressure washing is powerful enough to remove stains that would normally take hours of scrubbing using traditional methods.
1. Lime and Calcium Deposits
Lime and calcium sediments commonly build up on surfaces like:
- Pools
- Fountains
- Retaining walls
These deposits come from hard water and are extremely difficult to remove manually.
Fortunately, a professional pressure washer removes them with ease.
2. Chewing Gum
Chewing gum is one of the stickiest and most frustrating substances to remove from any surface.
Pressure washing works wonders on hardened gum — especially when using hot water instead of cold.
3. Deck and General Stains
Professional pressure washing Toronto services use commercial-grade detergents that break down stubborn stains on:
- Decking
- Interlock
- Concrete
- Patios
- Walkways
Even fresh interlock repair Toronto patches can be safely cleaned when done correctly — though extra care is required on delicate surfaces like wood decking.
4. Graffiti
Graffiti is difficult to remove and often leaves permanent marks when handled incorrectly.
A pressure washer operating at 2000–3000 PSI can effectively remove graffiti from most surfaces.
For brick or metal, a chemical pretreatment is recommended before washing.
Tip: This is best handled by professional pressure washing services in Toronto.
5. Mold and Mildew
Mold and mildew are more than just ugly — they pose health risks and can damage your property.
Pressure washing eliminates:
- Mold
- Mildew
- Algae
- Bacteria
from siding, fences, driveways, and roofs quickly and safely.
6. Oil, Grease, and Paint
Vehicle leaks and spills often leave behind:
- Oil stains
- Grease marks
- Paint residue
These stains are extremely difficult to remove using normal soap and water.
Pressure washing cuts through these contaminants and restores your surfaces.
It also removes peeling and flaking paint from fences and walls.
7. Rust
Metal surfaces exposed to moisture will eventually rust.
Power washing removes surface rust and restores the clean appearance of your exterior features.
Final Thoughts
These are some of the top uses of pressure washing that make it one of the most valuable exterior maintenance services available.